Stainless steel tank, 50 litres

This stainless steel container has a tight-fitting screw lid and is suitable for storing wine, juice, must, milk, oil, etc.

Height: 570 mm. Diameter: 370 mm. Capacity 50 litres.

Made from approx. 1 mm thick stainless steel, Inox 18/10. This is one of the best grades of stainless steel.

Fitted with a practical rim of approx. 1 cm at the base that you can hold on to when the tank needs to be turned, and a rubber gasket at the lid that makes the tank hermetically sealed. A separate plug for the tap hole is included if you do not wish to use the tap function.

The opening in the tank has a diameter of 19.8 cm.

Tap of chrome-plated brass. Stop plug of stainless steel.

Can be fitted with a hose, item no. 3037, for using the tank to store liquids with a temperature of up to 40 degrees Celsius, and for liquids above that temperature item no. 3037a. It is recommended that the hose is secured with a hose clamp, item no. 4344.

This product is made in Italy by a company that for decades has manufactured specialist equipment for the wine, must and olive oil industry.

Note: Cannot be used for liquids containing more than 20% alcohol.

Note:
Please note that the tank and the tap must not be exposed to prolonged contact with standing water. If they are, small superficial spots of rust may appear. This is a natural phenomenon that can occur with prolonged contact with water, especially iron-rich water. It can be caused by just a few small drops of water that remain in standing contact with the stainless steel, for example until the water evaporates. You also see it, for instance, on stainless steel bowls in commercial kitchens where the bowls are stacked on top of each other after washing before they are completely dry. However, it is not actual corrosion of the stainless steel, but something that forms on the surface and can easily be removed with a scouring brush, or in the tank's outlet with a smaller brush.