Vacuum bottle filler for mini bottles - spirits and liquids over 40 °C, Enolmaster, 2 filling heads

It starts automatically when the bottle is pressed against the filling unit and stops when the bottle is filled to the desired level, as the device has an adjustable filling setting. Both the filling volume and the bottle height can be adjusted. It can fill bottles with an inner neck diameter from min. 8 to max. 22 mm. It can be adapted to the height of the bottles by adjusting the base on which the bottles are placed. Any excess liquid from the filling, caused by foam or air bubbles, is automatically channelled into the container at the back of the device. This can subsequently be bottled. Nothing is therefore wasted during bottling. The container you fill from should preferably stand at the same level as the machine, as positioning it too low will result in the vacuum function having to work harder to fill the bottles, and they may not be filled all the way to the set level. Up to approximately 300-400 bottles per hour can be filled with this machine, depending on the bottle size and the person operating the unit. See the product's filling concept at this YouTube address: Illustration Very easy to dismantle and clean with hot water. Made by a company in Italy that has specialised in the development and production of bottling equipment for more than 20 years. A 200 cm suction hose approved for spirits and liquids over 40° C is included. An extra hose can be purchased. See item no. 4304b, which has a max. temperature tolerance up to 60 °C, and item no. 4304c for temperatures between 60 and 90 °C. Contact us for the exact price of an extra hose for filling liquids with an alcohol content of more than 20%. It can be connected to a filter system, see item no. 3255, so that you can both filter and bottle in one operation. See also the selection of filters in both plastic and stainless steel in this product group. Motor: 220 v – 50/60 Hz Dimensions: 65 x 46 x 45 cm Works at a pressure of -0.8 bar. Note: The device cannot be used for filling soft PET plastic bottles and the like. For bottling into such bottles, see item nos. 3589 and 3590. However, the device can be used for hard HDPE plastic bottles. Please feel free to enquire for further details. Net weight: 30 kg